Model Number: modular houses 1 Brand Name: Sanhe Key Specifications/Special Features: Base:Frame-construction: 3mm steel profile, cold rolled, 4welded corner castings with dimensions according with ISO norms.Floor: 18mm plywood, water resistant(V100), free of formaldehyde(E1), 1.5mm synthetic floor covering, Welded seams, water soluble adhesive, environment friendlyFloor base: 0.6mm galvanized sheet metal. Load bearing capacity: 2.8kN/m2working load.Insulation: 90mm polystyrene(density 38-40kg/ m3flash point class A-not flammable, smoke density class Q1-low smoke emission in accordance with NORM B3800).K-value: 0.2W/m2k

Roof:
Frame-construction: 3mm steel profile, cold rolled, 4welded corner castings with dimensions according with ISO norms, wooden perlins.
Load capacity: 2, 000N/m²
Roof covering/interior: 0.4mm galvanized painting steel both side and polystyrene foaming 60mm in the Middle, color White inside and blue outside, white is available.
Insulation: 6mm polystyrene(density 38-40kg/ m^3.To avoid cold bridges.
K-value: 0.18W/m²k

Corner posts
Profile: cold rolled 4.0mm steel profile
Fitting: the four corner posts are fitted with the base frame and the roof frame with a screwing.
Insulation: To avoid cold bridges, the corner posts are insulated with 20mm polystyrene(density 38-40kg/ m³

Wall panels
Exterior cladding: profiled galvanized sheet metal, PVC overlaid, 0.5mm.
Interior cladding: profiled galvanized sheet metal, PVC overlaid, o.4mm.
Insulation: 60mm polystyrene(density 38-40kg/ m³
Loading bearing capacity: 0.6Kn/m²

Painting/coating
All steel profile will be hot dipped galvanized(45μm)
Epoxy zinc primer: min40 microns
Polystyrene coating: min50 microns
Total coating: D.F.T: Min 90 microns

Windows
Dimensions: 885*1200 mm
The windows are built with PVC materials and fitted with guard against left net. They are equipped with a blinding system and an insect net.

Exterior doors
Aluminium-door with blind, door opening width 900/2000 mm.

Electrical installation:
Protection: protective current switch(40/4E-0.03A), automatic fuses(B-characteristics) of suitable power(10A, 16A)
Earthing: 1 galvanized strip iron earth electrode(2.5*4mm) with fastening. It is the responsibility of the buyer/lessee to arrange for the earthing installation on site.
Equipment:
Support two 220V fluorescent fixed in the ceiling
Support one low noise 220V fan fixed in the wall 2
There have an open hole and frame for assembly t